+447786071746
+441633968083

sales@zwanny-ltd.eu

Get in touch with us for a free quote!

 

proven & reliable oil &chemical pollution products 

04/07/17
We have got a new product range the anti-static absorbent pads and rolls (oil only) as it is an extra safety precoursion that when working around any flammable liquid to us anti-static certified absorbent pads and rolls due to the makeup of pads in a pack that when taking one out of the pack this could create a static discharge. (Socks and pillows are not effected due the product being larger and thicker. These are the best choice for absorbing flammable liquids in a low humidity environments. Anti-Static pads may help reduce sparking hazard while absorbing flammable liquids.
The polypropylene anti-static absorbents resists water but will absorb petroleum derived fluids such as oils,gasoline,kerosene and diesel. These absorbents are made from a layer of melt blown which is sonically bonded together. The sonic bonding points make the absorbent less prone to stray fibers becoming detached. The pads are treated to reduce the risk of electrostatic discharge, The anti-Static absorbents attain the BS7506 AND iec1340-2-1 standards and are fully UK tested and certified and UK manufactured. All packaging is also static dissipative to maintain the anti-static properties.
Sizes for the pads are 40x50cm 100 in a pack or can be supplied in a roll 76cm or spilt roll of 38cm
As we now stock these products and are not much more in cost than the non-anti-static if you have got any flammable liquid applications why not contact us to discuss these requirements.
04/07/17
One of our customers who are in Wales and refurbish rollers, had a problem with some of the rollers seeping out oil.
We supplied them with maintenance absorbent rolls which work but are on the floor thin and seem to cringle and fold up for this application they have got in one of the parts of the factory.
We suggested to use the rail mat which seems to stay in place and work well with the oil only seepage that they have got with the rollers.
The Railmat is normally used between the tracks to contain any oils or used in maintenance and freight yard areas or other industrial applications where there is a risk of a possible small spills or seepage of oils.
The railmat is a sandwich of 3 layers all bonded together. The top layer is black uv stabilized needle punch and the core is white Oil only cold form.
The bottom layer is a heavy transparent plastic that will prevent oil spills from leaking through to the ground.
We supply this as an oil only product and can supply this in 48cmx30m or 1.45mx30m.
It is a stock item and might be of interest to you company we are happy to send you a quote.
04/07/17
One of the food manufactures we supply with spill products and who we offer a waste management system to, had an issue with one of the main interceptors. As they were cleaning IBC’s in the yard, some of the run off got into the drain system which was a mix of edible oils, water and cleaning liquid somebody informed the water company who came to inspect and required the area to be cleaned.
With our waste management partners we came to clean the interceptor 1x vacuum tanker with a jet unit on board.
We vacuumed most of the liquid and afterwards jetted the area clean with the vacuum truck cleaning the sludge that was created.
It was a couple of hours work and we did come across a mix of rubbish in this interceptor from plastic bags to bit of wood.
After 3 hours of work the area was back to how it should be and we took 4tonne from the area and inspection later on in the day by Welsh Water approved of the clean up. If any sludge or interceptor cleaning is requited we are here to help and you can always contact us to discuss your waste stream management.
04/07/17
Sea works was a good exhibition for us this year, working with Lamor at the exhibition gone well. We have been able to meet new customers and have received a great number of enquiries to deal with for not only absorbents but skimmers and some of the oil booms we can offer from the Lamor range.
We would like to thank people who came to see us and You might not know but Lamor is the largest oil pollution equipment manufacture in The world with a number of factories in Scandinavia and Spain for boom,tanks, skimmers, pumps and vessels.
With many years of experience and new products being created any oil pollution issue Lamor will have a suitable product to contain and recover hydrocarbons being on water or land.
Not like several other manufactures Lamor have got equipment in stock for a quick turnaround why wait for 6-12 weeks for a section of boom or a skimmer as Lamor can respond in several days like us should this be required.
We did have a small competition to guess how many marbles in a large bottle there were 1146, we had 2 companies very close these being: PLA and the Port of Cork who came very close with the guess and close to the 1146, each won a spill kit.
As a give away we had a great number of stroop wafels with the Zwanny logo on them.
We will be looking to take part again next year with another competition and stroop wafels and free cans of drink.
In the meantime if any spill products are required please contact us.
04/07/17
One of our food manufacture customers had a problem with palm oils leaking into the drain system on site, and asked our advice and recommendations to have a total seal /spill free area.
We put forward our polyurethane seal which is 7cm in height 3meteres long and not only come with handles but can be connected to each section we now have supplied this product into a number of food manufactures in and around The UK.
Due to the outside application we put forward for them to combine the PU seal with socks and absorbent pads(oil only) to seal and contain any palm oil leaking out of the container that is on site.
With the combination of these products it will be a total seal application for the customer and to prevent palm oil leaking into the drains.
After the products where put into use the Water company came to inspect and have given the company the all clear.
We do give free advice and recommendations to your site,why not get in contact with
01/05/17

One of the other boom ranges we can offer is the SFBTC. This is a very light weight and cost effective boom solution that Lamor manufactures. This boom can be deployed in a multiple of environments like industrial sites, rivers and ports.
The SFB is manufactured from high visibility pvc and is easy to deploy and recover. The Cylindrical floats inside the boom are made from closed cell foam. The boom has a top tension cable that is enclosed pocket and on the bottom a galvanized 8mm ballast chain. The tension cable and ballast chain together give the boom strength. The SFB is supplied with Astm connector plates and can also be made with a slide connector system.
The boom comes in 15 or 30m section (pending on the size) from 360mm to 920mm.
Why not contact us to discuss your boom requirements
01/05/17

With the great flexibility we offer, on spill kits we tailor make the spill kit to meet your requirements, and no minimum order quantity is needed.
For one of our major UK customers this month we supplied 47 spill kits that where made up with a mix of items not only absorbents but also included a range of PPE. This customer has got a mix of spill applications and therefore we offered a chemical spill kit with contents and a maintenance spill kit.
The customer placed the order and if it was not for 1 ppe item that created a small delay of 2 days all items would have been delivered the next day from our warehouse in Southampton.
Please contact us to discuss spill kits or contents that you might require as in some cases you do get a full kit but might not use all the absorbents that are in the kit as we can build to your requirement.
01/05/17





One of our customers has got a challenge to resolve: residue from leftovers in bottles, this is a nice mix of milk, washing up liquids, soft drinks etc. (they recycle the plastic from the bottles). As shown above they required a pump to stand on the ground and to pump the area near the ledge as good as dry. The ideal option would be to have a sump and use a lobe pump on this application, as this is not available we had to come up with other options that could be used for this challenging application.
One of the many type of pumps we can offer is a “puddle” pump for this application the pump is electrically operated 230v and will pump 120l/min and has a 10m head. Pump got a stainless-steel shaft and a urethane volute plate for longer wear and double mechanical seals that are fitted in the lubrication chamber.
For any pump application being large or small or a special why not contact us to discuss the pump that we can offer to suit your application.
01/05/17

2 years ago, we took the plunge and put up our first stand at the above exhibition, time flies as last year we were one of the many visitors that came to the show instead of having a stand due to time.
This year we are looking to be back and you can find us in The Atlantic hall where we will be doing a joint stand with Lamor Cooperation, as we are The UK agents for Lamor.
You might not know but Lamor is the largest oil pollution equipment manufacture in The world with a number of factories in Scandinavia and Spain for boom,tanks, skimmers, pumps and vessels.
With many years of experience and new products being created any oil pollution issue Lamor will have a suitable product to contain and recover hydrocarbons being on water or land.

Not like several other manufactures Lamor have got equipment in stock for a quick turnaround why wait for 6-12 weeks for a section of boom or a skimmer as Lamor can respond in several days should this be required.

We will be present for the 3 days and why not come and look us up in the Atlantic hall and come for a chat and a cuppa.
01/05/17
One of our customers in the Middle East needed a skimmer that would be small and portable and does not require any of its own power would work well with a vacuum truck.
We put forward the Lamor Manta Ray skimmer head which is a special weir suction skimmer that has got a flat skimmer head and is shaped like a half a moon made from metal, the unit has got 2 handles fitted for easy to carry around a site if needed and to connect a rope for skimmer guidance when in operation.
The unit has got a number of thin suction channels for continuous liquid flow when in use.
The Manta Ray is not only a lightweight(11.8kg) but is very easy to use product.
Should there be any debris going into the skimmer the unit can be opened for easy removal of debris(as per picture shown above)
There are a number of other products on the market that have got builders foam in-between the 2 half’s and cannot be opened after use, which might make cleaning of the skimmer an issue and shorten the lifespan of the unit.
The unit is supplied with a Camlock for easy connection to a hose.
The skimmer capacity will be depending on the pump rating but the unit will take up at least 20m3/hr with a good pump or vacuum truck.
The skimmer can also be used in shallow water or slow-moving brooks or rivers.
Your vacuum truck might have hoses on board but to have all tools in reach has your vacuum truck got a Lamor Manta Ray skimmer on board? Why not have a chat with us on prices and delivery times for this excellent product.